Detergent 8® Low-Foaming Ion-Free Detergent
Detergent 8 is a nonionic, detergent for labware washers, PC board washers, power-spray systems, ultrasonic and manual cleaning. Removes oils, resins rosins, and fluxes from PC circuit boards, electronic parts, phosphate sensitive labware and nuclear contaminated equipment with no interfering conductive residues. Excellent replacement for solvent cleaning. Dilute 3:100. pH 11.
- Replace solvent cleaning
- Concentrated to save you money
- Biodegradable and readily disposable
- Penetrating wetting power to save you time
- Free rinsing to give you reliable results and no interfering residues
- Contains no phosphate, sulfur, chlorine, metal cation, halide, borate, silicate, carbonate, chlorocarbon, fluorocarbon or chelating ingredients
For manual, soak and ultrasonic cleaning, make a 3-5% solution (4-6 oz. per gal. or 30-50 ml per liter) in warm or hot water. An oily, milky solution is normal. Protective gloves and eyewear are recommended. For spray machines, add detergent at the hot water wash cycle to make a 2% solution (2 1/2 oz. per gal. or 20 ml per liter). For difficult soils, raise water temperature and use more detergent. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. Used on a range of glass, ceramic, plastic and metal surfaces. Corrosion testing is advisable.
Used to clean: Circuit boards, electronic parts, phosphate sensitive labware, nuclear reactor cavities, delicate industrial parts and nuclear contaminated equipment during outage. FDA certified.
Used to remove: Resins, rosins, oils, dirt, grime, particulates, residues, fluxes, chemicals and solvents.
Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, ceramic, plastic, and circuit boards. Can be used, with prompt rinsing, on soft metals such as copper, aluminum, silver, and gold. Aluminum can darken and mixed metal galvanic reactions can occur. Corrosion testing is advisable.
Cleaning method: Soak, brush, sponge, cloth, ultrasonic, ware washer, spray washer, pressure washer and flow through CIP (clean-in-place).
|1 gal bottle (3.8 L)||1701-1|
|Case of 4 x 1 gal (4 x 3.8 L)||1701|
|5 gal jerrycan (19 L) - Air OK||1705|
|15 gal drum (57 L)||1715|
|55 gal drum (208 L)||1755|
Specifications for Detergent 8® Low-Foaming Ion-Free Detergent
|Product Volume||1 Gallon Bottle or Case 4 x 1 Gallons or 5 Gallons Pail or 15 Gallon Drum or 55 Gallon Drum|